Chapter 3. Operation
The equal symbol after LBO in the second line indicates the
information that follows is displayed data and cannot be
edited.
Exit Any Menu Field Operation Or Display
Press
menu level or press
Data Port Identification
When configuring the unit, menu selections will include
options from data port submenus. Selecting data ports is neces-
sary because the TSU 120 uses a slot-port method to identify
which data port the menu item is referencing. If a module con-
taining a PBX DSX-1 option card with an Nx56/64 plug-on
interface is installed in the option slot, it would be designated
as:
DSX-1 Passthru=1.1
Nx56/64=1.2
The ports that are built into the TSU 120 are referenced as Slot
0. The Nx56/64 would be designated as 0.1 and the DSX-1
would be referenced as 0.2.
3-8
as many times as needed to return to the desired
Cancel
Shift+0 (Home)
Where slot=1 and port =1.
The DSX-1 is located in the option slot and is the first port in
that slot.
Where slot=1 and port=2.
The Nx is located in the slot and is the second port in that
slot.
TSU 120 User Manual
to return to the main menu.
61202129L1-1