ADTRAN TSU 100 User Manual page 97

You can use the
the cursor from one selection to another. Press
the action displayed in the LCD to the right of the cursor.
Map configuration involves these steps:
Initializing the Temp Map
Upon entering the DS0 maps configuration menu, the Temp
map reflects its last configured state. You can use the following
selections to initialize the temp map.
the displayed Temp Map to one of
three configurations.
the Temp Map from its current
configuration to one which reflects
the currently stored Map A or B
configurations, respectively.
the Temp Map to an all IDLE state. 3
61202052L1-1
and
Up
Step
1 Initialize the Temp Map to one of three
configurations (Current Map A, Current Map B, or
all Idles). This step is optional.
2 Edit the Temp Map so that it reflects the desired map
configuration.
3 Replace the current DS0 map A or B configuration
with the Temp Map configuration.
If you want to initialize ...
TSU 100 User Manual
Chapter 8. Telnet/Terminal Menus
or
Down Arrows Number Keys
Action
Use these selections...
1 through 3
1 and 2
to move
to perform
Enter
8-3