Ds0 Map Example; Figure 5-8. Create Temp Selection Screen - ADTRAN TSU 100 User Manual

Chapter 5. Configuration Menu

DS0 Map Example

A sample selection follows:
DS0: 01 to 24
PORT: IDLE, TST, + option module ports
TST designates which DS0s are used for QRSS testing when
activated under the 4)TEST Menu. When not used for testing,
the TST designation is identical to Idle.
1. With the cursor on CREATE TEMP, press

Figure 5-8. Create Temp Selection Screen

2. Use either the
3. Press
4. Use the
5. Press
6. With the cursor on the DS0 field, the DS0 number can be
5-16
displays the selection screen with the cursor positioned on
the first selection DS0 number. See Figure 5-8.
Select DS0 Number
Select Port
Arrow Keys
number (do not mix the use of the keys).
to complete the selection and move the cursor
Enter
to Port, the next field.
Arrow Keys
the installed option card.
to complete the selection and move the cursor
Enter
back to the DS0 field.
incremented or decremented by scrolling.
TSU 100 User Manual
or
Numbers
to select the port which is dependent on
. The unit
Enter
to enter the DS0
61202052L1-1