ADTRAN 1203060L1 User Manual
  1. Manuals
  2. Brands
  3. ADTRAN Manuals
  4. Network Hardware
  5. 1203060L1
  6. User manual
ADTRAN 1203060L1 User Manual

ADTRAN 1203060L1 User Manual

Hide thumbs Also See for 1203060L1:
Table of Contents

Advertisement

Quick Links

Download this manual
TSU LT
USER MANUAL
Part Number 1203060L1
61203060L1-1A
April 2003

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1203060L1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ADTRAN 1203060L1

Summary of Contents for ADTRAN 1203060L1

  • Page 1 TSU LT USER MANUAL Part Number 1203060L1 61203060L1-1A April 2003...
  • Page 2 ADTRAN, Inc. To the Holder of the Manual The contents of this manual are current as of the date of publication. ADTRAN reserves the right to change the contents without prior notice. In no event will ADTRAN be liable for any special, incidental, or consequential damages or for commercial losses even if ADTRAN has been advised thereof as a result of issue of this publication.
  • Page 3 Initial release of new part number. Conventions Notes provide additional useful information. Cautions signify information that could prevent service interruption. Warnings provide information that could prevent damage to the equipment or endangerment to human life. 61203060L1-1A © 2003 ADTRAN, Inc.
  • Page 4 They may explode. Check with local codes for special disposal instructions. 5. The socket-outlet shall be installed near the equipment and shall be easily accessible. Double pole/neutral fusing. Save These Important Safety Instructions © 2003 ADTRAN, Inc. 61203060L1-1A...
  • Page 5 If they do, you will be given advance notice to give you an opportunity to maintain uninterrupted service. 5. If you experience trouble with this equipment, please contact ADTRAN at (256) 963-8722 for repair/warranty information. The telephone company may ask you to disconnect this equipment from the network until the problem has been corrected or until you are sure the equipment is not malfunctioning.
  • Page 6 (CPE) to 1.544 Mbps or subrate digital services. • Until such time as subrate digital terminal equipment is registered for voice applications, the affidavit requirement for subrate services is waived. © 2003 ADTRAN, Inc. 61203060L1-1A...
  • Page 7 ( ) D. In lieu of the preceding training requirements, the operator(s)/maintainer(s) is (are) under the control of a supervisor trained in accordance with _________ (circle one) above. 61203060L1-1A © 2003 ADTRAN, Inc.
  • Page 8 _________________________________Signature _________________________________Title _________________________________ Date Transcribed and sworn to before me This ________ day of _______________, _______ _________________________________ Notary Public My commission expires: _________________________________ © 2003 ADTRAN, Inc. 61203060L1-1A...
  • Page 9 Department of Communications. Cet appareil numérique respecte les limites de bruits radioelectriques applicables aux appareils numériques de Class A prescrites dans la norme sur le materiel brouilleur: “Appareils Numériques,” NMB-003 edictee par le ministre des Communications. 61203060L1-1A © 2003 ADTRAN, Inc.
  • Page 10 Warranty TSU LT User Manual Warranty ADTRAN will replace or repair this product within the warranty period if it does not meet its published specifications or fails while in service. Warranty information can be found at www.adtran.com/warranty. Product Registration Registering your product helps ensure complete customer satisfaction. Please take time to register your products on line at www.adtran.com.
  • Page 11 Your reseller should serve as the first point of contact for support. If additional support is needed, the ADTRAN Support web site provides a variety of support services such as a searchable knowledge base, updated firmware releases, latest product documentation, service request ticket generation and trouble- shooting tools.
  • Page 12 Customer Service, Product Support Information, and Training TSU LT User Manual © 2003 ADTRAN, Inc. 61203060L1-1A...

  • Page 13: Table Of Contents

    Alternate Method of Control from TSU LT .........................33 T-Watch PRO Management Software Program ....................33 Chapter 4 Status Menu ......................35 NI Perf Rpts menu ................................35 Curr Err/Alm Menu ..............................36 Err/Alm Hist Menu ..............................37 Chapter 5 Config Menu ......................39 Network (NI) Menu ..............................39 61203060L1-1A © 2003 ADTRAN, Inc.
  • Page 14 Appendix A TSU LT Menu Tree .....................55 Appendix B DTE Data Rate Chart..................57 Appendix C Pinouts........................59 Network (USOC RJ-48C) ............................59 Control Chain In (RJ-48) .............................59 Control Chain Out (RJ-48) ............................60 Nx56K/64K DTE (V.35) ..............................61 Index..............................63 © 2003 ADTRAN, Inc. 61203060L1-1A...
  • Page 15 Figure 7-2. Network Loopback Tests .......................50 Figure 7-3. Self Test Results Screen ......................51 Figure 7-4. Port Loopback Tests .......................52 Figure A-1. TSU LT Menu Tree (Status and Config) ................55 Figure A-2. TSU LT Menu Tree (Util and Test) ..................56 61203060L1-1A © 2003 ADTRAN, Inc.
  • Page 16 List of Figures TSU LT User Manual © 2003 ADTRAN, Inc. 61203060L1-1A...
  • Page 17 Table 5-2. Normal Mode Operation ......................46 Table B-1. DTE Data Rate Chart ......................57 Table C-1. Network Pin Assignments.......................59 Table C-2. Chain In Pin Assignments.......................59 Table C-3. Chain Out Pin Assignments ....................60 Table C-4. V.35 Pin Assignment ......................61 61203060L1-1A © 2003 ADTRAN, Inc.
  • Page 18 List of Tables TSU LT User Manual © 2003 ADTRAN, Inc. 61203060L1-1A...

  • Page 19: Chapter 1 Introduction

    Introduction Chapter 1 TSU LT OVERVIEW The TSU LT belongs to the ADTRAN T1 single-port CSU/DSU family offering complete flexibility in connecting various data sources to T1 or FT1 facilities (see Table 1-1). Table 1-1. TSU Family of Single-port CSU/DSUs...

  • Page 20: Tsu Lt Features

    Nx56 or Nx64 data rates for T1 or FT1 service. The bandwidth can be selected as contiguous or alternate. Figure 1-3 shows a simple bridge application. TSU LT TSU LT TSU LT TSU LT Figure 1-3. Simple Bridge Application on a T1 or an FT1 Circuit © 2003 ADTRAN, Inc. 61203060L1-1A...

  • Page 21: Chapter 2 Inspection And Installation

    Carefully inspect the TSU LT for any shipping damage. If damage is suspected, file a claim immediately with the carrier and then contact ADTRAN Customer Service. If possible, keep the original shipping container for use in shipping the TSU LT back for repair or for verification of damage during shipment.
  • Page 22 The terminal should be fastened to the grounding lug provided on the rear panel of the equipment. The ring terminal should be installed using the appropriate crimping tool (AMP P/N 59250 T-EAD Crimping Tool or equivalent). © 2003 ADTRAN, Inc. 61203060L1-1A...

  • Page 23: Tsu Lt Rear Panel

    The interfaces include the following, and Appendix B , on page 57 shows the pinouts. • Network DS1 interface per AT&T 62411 • Control input (EIA-232)/chain port input • Chain port output • Nx56/64 serial V.35 61203060L1-1A © 2003 ADTRAN, Inc.

  • Page 24: Power Up Testing & Initialization

    The control port input provides an EIA-232 input from a PC or a modem for control of the TSU LT. You can also use it as a Chain input from any ADTRAN unit with a Chain port or as input for PC proxy agent control.
  • Page 25 The self-test works as follows: If... Then... a power-up (or commanded) self-test occurs the LCD displays ADTRAN TSU INITIALIZING and the LEDs illuminate sequentially. the self-test completes with no failures detected the LCD momentarily displays ALL TESTS PASSED. a failure is detected it is displayed in the LCD window.
  • Page 26 Chapter 2 Inspection and Installation TSU LT User Manual © 2003 ADTRAN, Inc. 61203060L1-1A...

  • Page 27: Chapter 3 Operation

    LED ON when TSU LT has clear to send (CTS) active toward DTE. A 2X16 LCD window that displays menu items used in configuration and displays information useful in monitoring the unit. See also LCD Window on page 28. 61203060L1-1A © 2003 ADTRAN, Inc.

  • Page 28: Lcd Window

    LCD window. Figure 3-3 on page 29 shows the menu tree for main menus and first-level submenus. (Appendix A, TSU LT Menu Tree, on page 55 contains the complete TSU LT menu tree.) Figure 3-2. TSU LT Main Menu Screen © 2003 ADTRAN, Inc. 61203060L1-1A...

  • Page 29: Status

    Use to set all of the parameters associated with the network interface. Use to control the TSU LT control-port baud rate and to set up the dial-out UNIT function. PORT Use to configure the parameters associated with the DTE (V.35) port. 61203060L1-1A © 2003 ADTRAN, Inc.

  • Page 30: Util (Utility)

    Displays the version number of the current software revision level. This SOFTWARE REV information is required when requesting assistance from ADTRAN Customer Service or when updates are needed. Reinitializes the unit (runs a self-test). This menu does not restore the factory REINIT UNIT default settings.

  • Page 31: Example Menu Operations

    Use the front panel arrow to access these. Figure 3-4. Cursor on Menu Item Arrow indicates that more submenus are available. Figure 3-5. Submenu Fields 3. To exit out of a main menu, press ANCEL 61203060L1-1A © 2003 ADTRAN, Inc.

  • Page 32: Selecting A Submenu

    CURR ERR/ALM is displayed giving the current state of the alarm. LOSS OF SIGNAL INACTIVE/ACTIVE Exiting Any Menu Field Operation or Display 1. Press as many times as required to return to a menu level. ANCEL © 2003 ADTRAN, Inc. 61203060L1-1A...

  • Page 33: Alternate Method Of Control From Tsu Lt

    T-Watch PRO Management Software Program T-Watch PRO is the ADTRAN management software program that allows the user to control the TSU LT from a PC. It provides complete control over the configuration of the TSU LT using a graphic interface.
  • Page 34 Chapter 3 Operation TSU LT User Manual © 2003 ADTRAN, Inc. 61203060L1-1A...

  • Page 35: Chapter 4 Status Menu

    NTRS NTER ANCEL performance data is cleared. Figure 4-2 on page 36 shows the LCD for an menu. Table 4-1 on page 36 shows the other data types available from the menu. NI PERF RPTS 61203060L1-1A © 2003 ADTRAN, Inc.

  • Page 36: Curr Err/Alm Menu

    Figure 4-3 shows an LOS alarm. Table 4-2 on page 37 provides a complete list of the errors and alarms. Alarm Type State (Active/Ina Figure 4-3. Loss of Signal (Current Errors/Alarms) Screen © 2003 ADTRAN, Inc. 61203060L1-1A...

  • Page 37: Err/Alm Hist Menu

    Bipolar Violations BPVs (the presence of two consecutive bits of the same polarity) in SF or ESF Frame Bit Errors Frame Bits received incorrectly at NI PLL Alarm Unable to sync up to selected clock 61203060L1-1A © 2003 ADTRAN, Inc.
  • Page 38 Chapter 4 Status Menu TSU LT User Manual © 2003 ADTRAN, Inc. 61203060L1-1A...

  • Page 39: Chapter 5 Config Menu

    Use this menu to access the configuration of parameters associated with the network interface in the TSU LT. This branch includes six submenus (see Table 5-1 on page 40). Figure 5-2 on page 40 shows one submenu. 61203060L1-1A © 2003 ADTRAN, Inc.

  • Page 40: Clock Sources And Timing

    (network, DTE, or internal timing). See the descriptions for Network Timing on page 41, DTE Timing on page 41, and Internal Timing on page 42. The clocking option selected always designates the clock source for transmission. Clocking necessary for receiving data is always recovered from incoming data. © 2003 ADTRAN, Inc. 61203060L1-1A...

  • Page 41: Figure 5-3. Network Timed Clock Source

    The DTE is the source of timing. The TSU LT uses the incoming DTE clock to determine the transmission timing. This is typically used in applications such as limited distance line drivers, where it is necessary to have the DTE as the primary clock source (see Figure 5-4). Figure 5-4. DTE Clock Source 61203060L1-1A © 2003 ADTRAN, Inc.

  • Page 42: Unit Menu

    Applications include private line driver circuits where one end is set to network and the other to internal. See Figure 5-5. Figure 5-5. Internal Clock Source UNIT MENU Use the submenus to change control port and alarm options. Figure 5-6 shows a sample LCD window. Figure 5-6. Configuration Submenu © 2003 ADTRAN, Inc. 61203060L1-1A...

  • Page 43: Cntrl Port Submenu

    OUTPUT Selects whether the alarm traps (if enabled) are sent directly, or if the telephone number stored in the TSU LT should be dialed first (industry-standard AT dial command sent to modem). Choices: DIRECT, DIAL 61203060L1-1A © 2003 ADTRAN, Inc.

  • Page 44: Port Menu

    If the DTE NTERNAL provides a clock with TX data, the clock selection is set to . The TSU LT XTERNAL depends on an externally supplied clock to accept the TX data. Choices: INT-INV, INTERNAL, EXTERNAL, AUTO © 2003 ADTRAN, Inc. 61203060L1-1A...
  • Page 45 Inband Channel only when commands are sent from T-Watch PRO to the remote unit (TSU LT B in Figure 5-7). If no T-Watch PRO activity is detected for 10 minutes, the Inband Channel is deactivated. 61203060L1-1A © 2003 ADTRAN, Inc.

  • Page 46: Figure 5-7. Inband Remote Configuration

    V.54 LOOP BK 511 TST ON SELF-TEST NETWK TEST NO DS0 NETWORK ACTIVE ACTIVE MAPPED ALARM Follows — — — — — — Where “ — “ = don’t care Figure 5-7. Inband Remote Configuration © 2003 ADTRAN, Inc. 61203060L1-1A...

  • Page 47: Chapter 6 Utility Menu

    SOFTWARE REV Displays the current software revision level. This information is required when requesting assistance from ADTRAN Customer Service or when updates are needed. REINIT UNIT Reinitializes the unit. Do not use this submenu to restore the factory default settings for all parameters;...

  • Page 48: Set Passcode

    , the menus can be changed NLOCKED at will. If an incorrect passcode is entered, the unit remains locked. FACT RESTORE Use the submenu to restore the factory default setting for all unit parameters. ACTORY ESTORE © 2003 ADTRAN, Inc. 61203060L1-1A...

  • Page 49: Chapter 7 Test Menu

    (NI). Options include 1) LOCAL LOOPBK 2) REM LB, 3) TEST PATTERN 4) CLR ERRS 5) INSERT 511 ERR , and Local Loopback The three choices available for setting the local loopback include , and OOPBACK 61203060L1-1A © 2003 ADTRAN, Inc.

  • Page 50: Remote Loopback

    Only V.54 loopbacks can be used with fractional T1 since the full T1 stream including the FDL is not transported to the far end (unless it is a private network). Facility Data Link (FDL) specifically relates to ESF. © 2003 ADTRAN, Inc. 61203060L1-1A...

  • Page 51: Test Pattern

    Use this menu to execute an internal self-test. This is the same self-test that is automatically performed at power-up. After displaying the LCD shows the results (including failures) of the self-test (see NITIALIZING Figure 7-3). Figure 7-3. Self Test Results Screen 61203060L1-1A © 2003 ADTRAN, Inc.

  • Page 52: Port Tests

    2. On-board data path; sending a known test pattern through an on-board loop 3. Front panel LED verification 4. Phase lock loop verification. If a failure is detected, note the failure number and contact ADTRAN Technical Support. Executing self-test disrupts normal data flow and prevents remote communication until the self-test is completed (approximately five seconds).

  • Page 53: Chapter 8 Circuit Testing

    Circuit Testing Chapter 8 Before using the TSU LT to pass data, ADTRAN recommends running tests on the circuit. Testing consists of sending a test pattern from end-to-end and checking for errors in the pattern. There are two types of tests used to accomplish this: 1.
  • Page 54 ANCEL ATTERN 2. Select to terminate the test and the 511 pattern generation. ATTERN Result: The far end remains in loopback until the network is set to EMOTE OOPBK OOPBACK under submenu item EMOTE OOPBK © 2003 ADTRAN, Inc. 61203060L1-1A...

  • Page 55: Appendix A Tsu Lt Menu Tree

    6)SET LBO DATA RATE 2)UNIT TRAPS 1)RATE 56/64 2)ALARMS OUTPUT 2)CHANNELS TEL NUM 3)DTE TX CLOCK 3)PORT 4)START CHAN 5)# OF CHAN 6)DATA 7)CTS 8)DCD 9)DSR 10)INBAND Figure A-1. TSU LT Menu Tree (Status and Config) 61203060L1-1A © 2003 ADTRAN, Inc.

  • Page 56: Figure A-2. Tsu Lt Menu Tree (Util And Test)

    ANSI FDL PBL 3)TEST PATTERN 511 ACT. DS0S AT&T PBL ALL ZEROS ALL ONES 4)TEST 4)CLR ERRS 5)INSERT 511 ERRORS 2)RUN SELF-TEST 3)PORT TESTS 1)DTE LOOPBK 2)DATA LOOPBK Figure A-2. TSU LT Menu Tree (Util and Test) © 2003 ADTRAN, Inc. 61203060L1-1A...

  • Page 57: Appendix B Dte Data Rate Chart

    728K 832K N=14 784K 896K N=15 840K 960K N=16 896K 1024K N=17 952K 1088K N=18 1008K 1152K N=19 1064K 1216K N=20 1120K 1280K N=21 1176K 1344K N=22 1232K 1408K N=23 1288K 1472K N=24 1344K 1536K 61203060L1-1A © 2003 ADTRAN, Inc.
  • Page 58 Appendix B DTE Data Rate Chart TSU LT User Manual © 2003 ADTRAN, Inc. 61203060L1-1A...

  • Page 59: Appendix C Pinouts

    Table C-2. Chain In Pin Assignments Name Description Ground connected to unit chassis. UNUSED — RXDATA Data received by the TSU. UNUSED — TXDATA Data transmitted by the TSU. UNUSED — Ring indicate from modem. UNUSED — 61203060L1-1A © 2003 ADTRAN, Inc.

  • Page 60: Control Chain Out (Rj-48)

    RX DATA of the next unit (Chain In pin 3). UNUSED — Data received from chained units by the TSU. Connect RXDATA to TX DATA of the next unit (Chain In pin 3). 6, 7, 8 UNUSED — © 2003 ADTRAN, Inc. 61203060L1-1A...

  • Page 61: Nx56K/64K Dte (V.35)

    Transmitted data (TD-A) from DTE Transmitted data (TD-B) from DTE TX clock (TC-A) TX clock (TC-B) External TX clock (ETC-A) from DTE External TX clock (ETC-B) from DTE NN&K — Test mode (TM) to DTE 61203060L1-1A © 2003 ADTRAN, Inc.
  • Page 62 Appendix C Pinouts TSU LT User Manual © 2003 ADTRAN, Inc. 61203060L1-1A...

  • Page 63: Index

    Number of errored seconds 36 Inserting 511 errors 51 CTS 45 Nx56/64 Inspecting for damages 21 Current errors/alarms 29 serial interface 24 Internal timing 42 Customer Service, Product Sup- Nx56K/64K DTE Introduction 19 port Information, and Training 10 61203060L1-1A © 2003 ADTRAN, Inc.
  • Page 64 V.54 inband PLB 50 Severely errored seconds 36 Power up testing and initialization viewing menus 32 Software revision 30 Power-up or commanded self-test Start channel 45 XMIT alarm 40 Status 29 Product Registration 10 Yellow alarm 37 © 2003 ADTRAN, Inc. 61203060L1-1A...

This manual is also suitable for:

Tsu lt

Table of Contents