New Rock Technologies NRP1004 Series User Manual page 17

NRP1004 Series IP Phone
Step4 Press Del to delete the current information displayed on the screen, enter the username and
password, and press Save.
Step5 Press Back six times to return to the stand-by screen.
Step6 Check the status. If the screen shows "Negotiating...", the NRP1004/P is trying to access the
PPPoE Server; if the screen shows an IP address, the PPPoE mode takes effect.
Static IP mode (for static ADSL/Cable or no PPPOE/DHCP network)
Step1 Obtain information about the network parameters, such as the IP address, subnet mask, default
gateway/router, and Domain Name System (DNS) from the network provider or network
technical personnel.
Step2 Press Menu > Settings > Advanced Settings, and enter the passwords. Choose Network >
WAN settings > Connection Mode. Then, choose Static through navigation keys and press
Save.
Step3 Press Back, to return to the parent menu, choose Static Setting, and press Enter.
Step4 Press Del to delete the current information displayed on the screen, enter the IP address, subnet
mask, gateway, and DNS, and press Save.
Step5 Press Back six times to return to the standby screen.
Step6 Check the status. If the screen shows Static and the IP address and gateway just set, the Static
mode takes effect.
DHCP mode
Step1 Press Menu > Settings > Advanced Settings and enter the passwords. Choose Network > WAN
settings > Connection Mode. Then, choose DHCP through navigation keys and press Save.
Step2 Press Back six times to return to the standby screen.
Step3 Check the status. If the screen displays DHCP in the first line, and the IP address and gateway
just set in the second line, the DHCP mode takes effect.
New Rock Technologies, Inc.
User Manual
2-3