Call Log - New Rock Technologies NRP1004 Series User Manual

User Manual
Table 5-4 PPPoE settings parameters
Name
Server Name
User
Password
After the configuration, click Finish and the IP phone will save the current setting and reboot
automatically. After reboot, you can dial by the SIP account.

5.3.3 Call Log

You can check all the call information in this interface.
Figure 5-7 Call information interface
Table 5-5 Parameters
Name
Start Time
Duration
Dialed Calls
5-6
Description
Inputs the name of a PPPoE server. If the PPPOE service provider has no special
requirements , you can use the default value.
Inputs your ADSL account.
Inputs your ADSL password.
Description
Displays the start time of a call record.
Displays the conversation duration of a call record.
Displays the account/protocol/line of outgoing call record.
NRP1004 Series IP Phone
www.newrocktech.com