Table of Contents
Advertisement
User Manual
Name
Auto
Answer
Timeout
Enable
Session
Timer
Session Timeout
Subscribe
MWI
MWI Number
Subscribe Period
Conference Type
Conference
Number
Registration
Expire
Enable
Service
Code
DND On Code
DND Off Code
Always CFwd On
Code
Always CFwd Off
Code
Busy CFwd On
Code
Busy CFwd Off
Code
No Ans. CFwd
On Code
No Ans. CFwd
Off Code
Anonymous
Code
Anonymous
Code
5-20
Description
Sets the timeout period for the phone to automatically answer the incoming call. For
example, if the value is set to 60, the phone will automatically answer the call that is
not answered within 60 seconds.
Set Enable/Disable Session Timer, whether support RFC4028.It will refresh the SIP
sessions.
Sets the session timeout period.
for
Enables the phone to subscribe the peer status or voice messages..
Sets an MWI number to receive voice message and notifications from the SIP server.
Sets the interval for sending subscription packets.
Specifies the type of a conference. If the value is set to Local, the conference ID is not
required.
Specifies the number of a conference, which can be obtained from the system
administrator.
Sets the registration expiration time of the SIP server. The default value is 60, in
seconds. If the registration expiration time required by the SIP server is different
(longer or shorter) than the value configure on the phone, change the value on the
phone to the time recommended by the server and register again.
Enables the service code function.
Enables the DND On Code function. When you press the DND key, the phone will
send a message to the server, and the server will turn on the DND function. After that,
the server will reject any incoming call and information about the incoming call will
not be displayed in the Call History or on the LCD screen of the phone.
Disables the DND Off Code function. When you press the DND, the phone will send a
message to the server, and the server will turn off the DND function accordingly.
Enables the phone to send a message for the server to turn on the function
immediately. After that, the server will always forward the incoming call to a preset
number automatically and information about the incoming call will not be displayed in
the Call History or on the LCD screen of the phone.
Disables the Always CFwd Off Code function. The phone will send a message to the
server, and the server will turn off the function immediately.
Enables the phone to send a message to the server and instruct the server to turn on the
function immediately. In the scenario where the phone is in calling and the call waiting
function is disabled, the server will automatically forward the new incoming call to a
preset number . Information about the incoming call will not be displayed in the Call
History or on the LCD screen of the phone.
Disables the Busy CFwd Off Code function. The phone will send a message to the
server, and the server will turn off the function immediately.
Enables the on answer forward function. The phone will send a message to the server,
and the server will turn on the function immediately. When an incoming call is not
answered after the timeout period, the server will forward the call to a preset number
automatically. Information about the incoming call will not be displayed in the Call
History or on the LCD screen of the phone.
Disables the No Answer CFwd Off Code function. The phone will send a message to
the server, and the server will turn off the function immediately.
On
Enables the anonymous call function. The phone will send a message to the server, and
the server will turn on the function immediately.
Off
Disables the anonymous call function. The phone will send a message to the server,
and the server will turn off the function immediately.
NRP1004 Series IP Phone
www.newrocktech.com
Advertisement
Table of Contents
