Wizard - New Rock Technologies NRP1004 Series User Manual

NRP1004 Series IP Phone
Table 5-1 Status parameters
Name
Network
Accounts

5.3.2 Wizard

Figure 5-3 Wizard interface
The connection mode of the phone varies with the network condition. You need to select a proper mode
according to the real world situation. The NRP1004/P provides three network connection modes:

Static IP: If your ISP server provides you a static IP address, you can choose this mode, and fill in
the corresponding information including the static IP address, subnet mask, network gateway, and
DNS. The preceding information can be obtained from the ISP service provide or network
administrator.

DHCP: In this mode, the system will obtain the network information from the DHCP server
automatically, and no action is required.

PPPoE: In this mode, you need to input your ADSL account and password.
To set your network quickly, see 2.2.1 Network Settings
Static IP
Choose Static IP, and click Next to configure and browse the network address and SIP parameter(by
default, SIP line 1 is used). Click Back to return to the previous page.
New Rock Technologies, Inc.
Description
Contains configuration information about the WAN and LAN ports, including the port
connection mode (static, DHCP, or PPPoE), MAC address, IP address, IP gateway, and
status (Enabled or Disabled) of the DHCP service and bridge mode.
Contains information about the phone numbers corresponding to SIP lines 1-6 and
IAX2.
Information at the bottom of the page is the version number.
User Manual
5-3