Call Forward; Call Hold; Call Waiting; Mute - New Rock Technologies NRP1004 Series User Manual

User Manual

3.1.4 Call Forward

This function forwards an incoming call to another phone. Once this function is enabled, the icon
displays in the upper right corner of the screen.
The status of the call forwarding includes:

Off: Call forward is disabled by default.

Always: Incoming calls are immediately forwarded.

Busy: Incoming calls are immediately forwarded when the phone is busy.

No Answer: Incoming calls are forwarded when the phone is not answered after a specific period.
Do as follows to configure the call forward function through a phone:

Press Menu > Features > Enter > Call Forwarding > Enter.

Choose any of the four options: Disabled, Always, Busy, and No Answer.

If you choose any of the option (except for Disabled), enter the phone number incoming calls will
be forwarded to and press Save to save the setting.

3.1.5 Call Hold

Press the HOLD key to put an active call on hold.

If there is only one call on hold, press HOLD to retrieve the call.

If there are more than one call on hold, press the corresponding line key, and the navigation key
or

3.1.6 Call Waiting


Press Menu > Features > Enter > Call Waiting > Enter.

Use the navigation key

Press Save to save the setting.

3.1.7 Mute

If you press Mute during the conversation, the icon
prevents the caller from hearing you, but you can still hear the caller. You can press Mute again to
resume the normal conversation.

3.1.8 Call Transfer

Blind Transfer
During conversion, you can press the Transf key, enter the number to transfer to, and press "#" to
transfer the current call to a third party. After the transfer, you are disconnected with the caller. Note
that you cannot select the SIP line when the call transfer is enabled.
3-2
to select a call, and then press HOLD to retrieve the call.
or to enable or disable the call waiting function.
will display in the LCD screen. This function
NRP1004 Series IP Phone
www.newrocktech.com