Phone Function; Basic Function; Making A Call; Answering A Call - New Rock Technologies NRP1004 Series User Manual

NRP1004 Series IP Phone

3.1 Basic Function

3.1.1 Making a Call

Call Device
You can make a phone call via the following modes:

If you pick up the handset, the icon

If you press the Speaker key, the icon

If you press the Headset key in the scenario where a headset is connected, the icon
display in the upper left corner of the screen.
You can dial the number first, and choose a call mode as needed.
Call Mode

Dial the number and press the Send key.

Press the History key, and use navigation keys to choose the number to dial (press the navigation
key

Press the REDIAL/SEND key to enter the outgoing call list.

Press the programmable keys which are set as different speed dial keys for dial-up.

3.1.2 Answering a Call

Methods for answering an incoming call are as follows：

If there are no other calls on the line, you can pick up the handset or press the Speaker or Answer
key to answer the call If a headset is connected, press the Headset key.

If you are on a call currently, press the answer softkey.
During the conversation, you can alternate between Headset, Handset and Speaker phone by pressing
the corresponding buttons or picking up the handset.

3.1.3 DND

Press the DND key to activate the DND mode. In DND mode, the icon
of the screen and all the incoming calls will be rejected. The rejected incoming calls will be prompted
in the incoming call page, and you can check such information in the Call History. If the DND mode is
already enabled, you can press the DND key again to quit the DND mode.
www.newrocktech.com
or to choose the missed calls, incoming calls, and outgoing calls.
will display in the upper left corner of the screen.
will display in the upper left corner of the screen.
3

Phone Function

will display in the middle
User Manual
will
3-1