New Rock Technologies NRP1004 Series User Manual page 58

User Manual
Step match line information, comparing the selected dial-up line is a line in the table and dialpeer is the
same, if the same, continue down the match, otherwise the next query.
The third step is for a prefix or exact match.

Mode: If the mode is set to SIP, this rule takes effect only for SIP-based calls. If the mode is set to
IAX2, this rule takes effect only forIAX2 calls.

Destination: indicates the destination IP address.

0.0.0.1: indicates that this rule takes effect only for calls on SIP line 1.

0.0.0.2: indicates that this rule takes effect only for calls on SIP line 2.

0.0.0.x: indicates that this rule takes effect only for calls on SIP line x.

0.0.0.0: indicates that this rule takes effect for calls on all SIP lines.
Configuration examples are as follows:

If you dial 21111 and SIP1 is registered successfully (which will thus be the default line), the call
will be sent out through SIP line 1, with the called number of 21111.

If you dial 32222 and SIP1 is registered successfully (which will thus be the default line), the call
will be sent out through SIP line 1, with the called number of 32222.
To activate the configured dial peer function,

Choose SIP2 and dial 21111. The call will be sent out through SIP line 2, with the called number
of 1111.

Choose IAX2 and dial 32222. The call will be sent out through IAX2, with the called number of
2222.
Table 5-17 Examples of different alias application
Set by web
5-28
Description
You need set phone number, Destination,
Alias and Delete Length.
Phone number is XXXT; Destination is
255.255.255.255 (0.0.0.2) and Alias is
del.
This means any phone No. that starts
with your set phone number will be sent
via SIP2 line after the first several digits
of your dialed phone number are deleted
according to delete length.
This setting will realize speed dial
function, after you dialing the numeric
key "2", the number after all will be sent
out.
NRP1004 Series IP Phone
Example
If you dial "93333",
the number that the
SIP2 server receives
is "3333".
When you dial "2",
the number that the
SIP1 server receives
is 33334444.
www.newrocktech.com