Table of Contents
Advertisement
User Manual
number of the voice mail...
Press Save to save the configuration.
Press Voicemail to check the voice mail. Then, press Dial to call the voice mail number. After the
connection is established, you need to enter the password to check voice messages.
3.2.9 Ping
Press Menu > Ping > Enter.
Enter the IP address to be pinged and then press Start. If the IP address is incorrect, press Delete
to delete the IP address and change the input method.
If the screen displays OK several seconds after the IP address is input,, the ping is successful; if
the screen displays Failed, the ping fails.
3.2.10 Programmable Key Configuration
The phone has four programmable keys. You can configure different functions for each key. Functions
that can be configured are listed as follows. The default configuration for each key is N/A, indicating
that the key is not configured with any function.
Setting the key as Memory Key
Press Menu > Settings > Basic Settings > Enter > Keyboard > DSS Key Settings. You can choose to
configure the line key or memory key using the navigation key
configure the memory key, set the phone number, line name, call mode, speed dial, interphone, BLF,
Presence, MWI, and call park.
Speed dial: You can configure the key as a speed dial key. Input the number wanted and save the
configuration. After that, press this key to call the preset number in the speed dial mode.
Interphone: You can configure the key with the interphone function useful. This function allows
an operator or a secretary to quickly answer the call and is thus widely use in the office
environment.
BLF: BLF is short for "Busy lamp field", and is used to inform the user of the status of the object
subscribed.. This function can cooperate with the server to pick up the phone call. BLF can help
you monitor the status (idle, ringing, or busy) of other SIP account. For information about the
LED status, see 1.3 LED Indicator.
Note: In the Web interface, you can also set the pickup number to activate the pickup function. For
example, if you set the BLF number to 212, and the pickup number to 189, when there is an
incoming call to 212, you can press the BLF key to pick up the incoming call of 212. Note that to
enable the BLF function, you need to input *8 in the pickup number of the Web page.
Presence: In addition to subscribe the object status, this function can check whether object online.
Note: You can subscribe either the BLF or presence information of the same number.
MWI: When the key is configured with the MWI function, you can press this key to quickly check
3-6
NRP1004 Series IP Phone
or
. If you choose to
www.newrocktech.com
Advertisement
Table of Contents
