New Rock Technologies NRP1004 Series User Manual page 62

Table of Contents

Advertisement

User Manual
Table 5-19 Feature parameters setting
Name
DND (Do Not
Disturb)
Ban Outgoing
Enable Call
Transfer
Enable
Waiting
Semi-Attended
Transfer
Enable
3-way
Conference
Enable Auto
Hand down
Accept Any Call
Auto Hand down
Time
Enable
Completion
Enable Auto
Redial
Enable Pre-Dial
Auto Redial
interval
Enable
Silent
Mode
5-32
Description
Enables the phone to reject any incoming call and prompt the caller that the phone is
busy. The outgoing call of the phone is not affected.
If you select Ban Outgoing to enable it, and you cannot dial out any number.
Enables the phone to transfer incoming calls to a specified number. Call Transfer by
selecting it.
Call
Enables Call Waiting by selecting it. Then the phone prompts the caller to redial or that
the phone is busy or the call is rejected. When it's ok and the phone finds out that the
caller is idle by sip message, it will prompt the user to redial.
Enables the phone to transfer incoming calls to a specified number in semi-attended
mode.
Enables the user to start a 3-way conference by selecting it.
The phone will hang up and return to the idle status automatically in the hands-free
mode.
If you select it, all calls will be accepted even if the calling number is untraceable.
Specifies Auto Hand down Time, the phone will hang up and return to the idle status
automatically after Auto Hand down Time in the hands-free mode, and play dial tone
Auto Hand down Time in the handset mode.
Call
Enables Call Completion by selecting it.
Enables the phone to prompt you whether to dial the number again in the case that the
peer is busy or the call is rejected (the code 486 is received).
After this feature is disabled, the number dialed in standby interface, will be sent out
over the time; After the feature is enabled, the number will not be send out over the
time.
Sets the auto redial interval of the phone.
Enables Silent Mode by selecting it, the phone light will blink to prompt the user that
there is an incoming call instead of playing ring tone.
NRP1004 Series IP Phone
www.newrocktech.com

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nrp1004Nrp1004/p

Table of Contents