Click To Dial; Call Back; Auto Answer; Hotline - New Rock Technologies NRP1004 Series User Manual

NRP1004 Series IP Phone

3.2.4 Click to Dial

When browsing in an appointed Web page, user A can click to call user B via a link (this link to user B),
then user A's phone will ring, after A hooks off, the phone will dial to B.
Note: External software supporting the click to dial function is required.

3.2.5 Call Back

The function allows you to call back the last number that called you.

3.2.6 Auto Answer

If an incoming call is not answered until the answer time expires, the phone enabled with this function
will answer the call automatically.

3.2.7 Hotline

You can set a hotline number for each SIP line in the dialer interface. After Warm Line Time, the
phone will call out the hotline number automatically.

3.2.8 Application

SMS

Press Menu > Applications > Enter > SMS > Enter.

Use the navigation keys to select and read messages in the Inbox/Outbox.

After checking a message, you can press Reply to reply it. Use the 2aB softkey to select an input
method. Then, compose a reply message, press OK, select a line for message sending, and press
Send.

To compose a new message, press New and select an input method using the 2aB softkey.
Compose the message, press OK, select a line for message sending, and press Send.

To delete a message, press Delete. There are three options for you to choose: Yes, All, and No.
Choose any of them as needed.
Memo
Memos remind you of important things.
Press Menu > Application > Memo > Enter > Add.
There are some options to configure: Mode, Date, Time, Text, and Ring Tone. After the configuration,
press Save.
Voice Mail

Press Menu > Application > Voice Mail > Enter.

Select the SIP line to be configured with a voice mail through the navigation key
and press Edit. Then, use the navigation key
New Rock Technologies, Inc.
or to enable voice mail, and input the
User Manual
or ,
3-5