Cleaning And Maintenance; Disposing Of The Appliance - OBH Nordica Master Steel+ 7748 Instructions For Use Manual

Cleaning and maintenance

Always unplug before cleaning. Wash the blender jug, take-away mug, lid
and blade unit by hand or in a dishwasher after each use. Important! Always
clean the blender jug/take-away mug immediately after use. This will prevent
discolouring. Carefully dry all the parts before putting them away. Do not
use abrasive cleaning products. Remove any stubborn stains by soaking and
rubbing with a soft cloth and mild detergent. Use a damp cloth when cleaning
the motor section. Dry thoroughly before re-using the appliance or putting it
away.
You can also clean the blender jug/take-away mug by pouring around 300 ml
of water along with a few drops of washing-up liquid into the jug/mug. Then
run for around 1 minute. Then rinse the jug carefully with clean water.
Remove the blade unit from the blender jug/take-away mug and clean it by
hand or in a dishwasher. Remember to remove the seal located around the
lock ring and in the lid for the take-away mug and clean them. Dry carefully
afterwards. The easiest way to remove the seal in the lid is by using a plastic
stick or similar (be sure not to damage the seal). Note that the blades are very
sharp.
IMPORTANT!
THE MOTOR SECTION MUST NEVER BE IMMERSED IN ANY LIQUID!

Disposing of the appliance

By law, electrical and electronic equipment must be collected for the
recycling of components. Electrical and electronic equipment marked
with the waste management symbol must be disposed of at a municipal
recycling point.
OBH Nordica LIMITED GUARANTEE
The Guarantee
OBH Nordica guarantees this product against any manufacturing defect in
materials or workmanship during 2 years within Sweden, Norway, Denmark and
Finland, starting from the initial date of purchase or delivery date.
If the blender jug's blade unit is difficult to remove,
use a screwdriver or similar (see picture).
37