Cleaning Your Appliance - OBH Nordica Blend Force LH4358S0 Instructions Of Use

Table of Contents

Advertisement

Available languages
  • EN

Available languages

4. Then turn the assembled accessory (D or E) a quarter turn, anti-clockwise,
until the closed lock is aligned with the arrow on the bowl (Fig. 8 -
position 2).
5. Connect the appliance and turn the speed selector (B) to the desired
position or pulse a few times. Hold the bowl (D3, E2) when the appliance
is in operation. To turn off the appliance, turn the speed selector (B) to put
it back to position "0".
6. Unlock the accessory by turning it a quarter turn, anti-clockwise, until
the closed lock is aligned with the arrow of the bowl. Remove the
assembled accessory (D, E) from the motor unit. Put it to the worktop
before unlocking the blade (D1, E1) from the bowl (D3, E2) by reversing
the order of assembly. The blades are very sharp: handle very carefully to
avoid injury. You can then remove the preparation in the bowl.
* The colour of the bowl can change after the mixing of certain very hard
ingredients (cloves, cinnamon, etc.).
Ingredients
Apricots/Figs
Apricots/Figs
Rusks
Onions
Shelled almonds/hazelnuts
Fresh coriander/parsley
Coffee beans

CLEANING YOUR APPLIANCE

Never immerse the motor unit (A) in water and never place it under
running water.
Unplug the appliance and remove the accessories.
Handle them with care: the blades of the blender jug and the accessories
are sharp.
Remove the jug (C) or bowl (D3 or E2), then rinse it and its lid under
running water.
Clean the motor unit (A) with a damp cloth. Dry it carefully.
To make cleaning easier, wash all removable parts with water and a little
washing-up liquid immediately after use.
To make it easy to clean the blender jug (C4), unlock the blade (C2, D2,
E2) by turning it a quarter-turn, anti-clockwise. It is possible to unclip the
blade support (C1) to make cleaning easier. Remove the seal (C3) and
clean the blade support and blade using running water.
After cleaning, remember to correctly fit the seal (C3 or D2) back onto
the blade unit. Be careful to avoid any damage to the seal by the blades
cutting it.
46
Quantities (max.)
*600W _ 45 g
*700W _ 80g
1 biscuit
60 g
60 g
10 g
40 g
Operating time
4 seconds
at speed 2
4 seconds
at speed 2
10 pulses
8 pulses
20 pulses
5 pulses
30 seconds
at speed 2
Accessory
E
E
E
E
E
E
D

Advertisement

Table of Contents
loading

This manual is also suitable for:

Blend force lh4201s0

Table of Contents