Cleaning And Maintenance - OBH Nordica TWISTER FUSION BLACK 6694 Instruction Manual

Use
• Place the motor section on a flat, stable surface and plug into a wall socket.
• Fill the bottle with ingredients. The maximum level is 600 ml (see marking
on bottle) and must not be exceeded. For best results, we recommend filling
the bottle with liquid ingredients first and then fresh/frozen ingredients (cut
the ingredients into pieces no larger than 2 cm).
• Screw the blade unit securely on to the bottle's opening. Make sure that
the transparent sealing ring is in place in the blade unit before starting the
appliance. Then place the bottle with the blade unit on the motor unit by
matching the open padlock on the blade unit with the same symbol on the
edge of the motor unit. Turn the bottle clockwise until it locks in place. To
start the product it's necessary to attach the blade base firmly to the plastic
bottle. The appliance is ready to use when the white activation knob (6)
underneath the blade base is no longer possible to press down. This is the
only way to secure the blade unit into the motor unit and get the appliance
to start.
• Insert the plug into a wall socket and start the appliance by pressing the
power switch. Once the desired results have been achieved, release the
switch. The mixing process is now complete.
This appliance is not suitable for mixing potatoes, cream, egg whites, dough,
etc.
Never start the appliance without first locking a bottle in place. Only bottles
supplied by OBH Nordica may be used.
The appliance must not be used with hot liquids, as the pressure in the bottle
will be too great.
If the motor stops during use, unplug the appliance and remove the bottle from
the motor unit. Let the appliance rest for at least 15 minutes before starting it
again.
Turn the bottle so that the blade unit is facing upwards and unscrew the blade
unit from the bottle. Then screw the spout lid supplied to the bottle. The bottle
is ready to drink from or take away with you.

Cleaning and maintenance

Always unplug the appliance prior to cleaning and maintenance.
Always clean the bottle immediately after use before the contents dry on. This
makes cleaning much easier.
NOTE! Handle the blade unit with care.
26