Cleaning And Maintenance - OBH Nordica Pro Mix 1000W Instructions Of Use

MAkE SURE tHAt tHE LiD AnD tHE fiLLER
HAVE BEEn MOUntED BEfORE yOU
REACtiVAtE tHE BLEnDER!
iMpORtAnt! After mixing of ice cubes the glass jug
should be cleaned in lukewarm water, as the jug has
been cooled and hot water may cause tensions in the
glass and make it burst.

Cleaning and maintenance

Always unplug before cleaning. Wash the jug, the lid
and the feeding lid in warm water with a washing-
up liquid after use. Wipe all parts thoroughly before
storing. The motor part must never be cleaned in a
dishwasher. Do not use chemical detergents or other
scouring products. Remove difficult spots after a brief
soak and rub with a mild detergent and a soft brush.
Use a damp cloth for cleaning the motor part. Let it
dry completely before you use it again or put it away.
You could also clean the jug by adding about 3
decilitres of water in the jug with a few drops of
washing-up liquid and let the ice crush function run
for 30 seconds. Then rinse the jug in clean water.
Demount the blade holder from the glass jug and
clean it separately as follows: Put the glass jug upside
down and loosen the locking ring at the bottom of the
jug by turning it anticlockwise. Lift off the blade holder
from the glass jug and clean the blade holder and the
gasket carefully with a washing-up brush. Wipe dry.
Note that the blades are extremely sharp.
38