Microcom 438TM Operator's Manual page 34

Getting Started
3.6.10.1 Paper tab - Rotation
The rotation setting rotates the image being printed. This is used when Portrait or
Landscape is used. The "A" image shows the rotation setting impact.
3.6.10.2 Paper tab - Units
This is used to select the units that the driver uses for most measurements. Some units are
in dots or pixels and should be entered as such.
3.6.10.3 Paper tab - Page Sizes
This is where the user enters forms to the Print Server Properties of the driver. Select the
drop down menu to select standard forms that have been installed with the driver or enter
the size of your form and select the New icon to create a form size that matches your media.
3.6.10.4 Paper tab - Mirror
Selecting this option will cause the image to appear like it being observed in a mirror.
3.6.10.5 Paper tab - Default
This button will cause the driver to load in its default settings for the model driver installed.
Please note that this default may not represent your media type or size.
3.6.11 Printing Preferences - Media tab
The Media tab is used to set specific setting of the media size and operations that in a form
that the printer requires to maintain correct registration.
3-22 438TM Operator's Manual - 880049-0113
Chapter 3