Microcom 438TM Operator's Manual page 29

Chapter 3 Getting Started
3.6.2 Configuring the Driver
This section will explain how to configure the Windows Driver for proper operation. The
example below also shows a Microcom Thermal Printer under Unspecified devices. This is
the USB driver that is loaded when the printer is powered on and the printer USB port is
connected to the printer.
Under Devices and Printers, you should see the printer model that was installed. Right click
on the icon and select Printer properties to setup and to change the driver settings.
3.6.3 Printer Properties Page - General tab
This opens the printer properties page. From this screen, Print Test Page may be selected
to generate a test page that is sent to the printer. The test page is printed on the media size
and type that are specified in the driver preferences.
438TM Operator's Manual - 880049-0113 3-17