Table of Contents
Advertisement
Preparing for the Installation
Table 12: Installation prerequisites (continued)
Task
Task
num
ber
5
Assign a password for additional
access security. No default
password is assigned to the CLI.
6
Before attaching equipment to
the device, you must configure
an interface IP address to the
subnet on which the device will
be located. Initial IP address
configuration is performed using
the CLI with a direct serial
connection.
7
Connect an Ethernet connection
to the system.
8
Test IP connectivity to other
devices by pinging them and
tracing routes.
9
Continue configuring the device
using the CLI.
10
Secure access to the device.
Shipping carton contents
When unpacking the device, verify that the contents of the shipping carton is complete. Save the
shipping carton and packaging in the event you need to return the shipment.
•
The SLX 9640 Switch Router comes with an accessory kit containing the following items:
◦
XBR-R000297 four-post rack mount kit
◦
Serial cable with an RJ-45 connector
◦
Two 6-ft. power cord
◦
Power cord retainer clip
◦
Rubber feet, required for setting up the device as a standalone unit China-RoHS Hazardous/Toxic
Substance statement
◦
EULA/Read-Me document
◦
USB drive, 8G
Task details or additional information
Extreme SLX-OS Management Configuration Guide
Extreme SLX-OS Management Configuration Guide
Refer to
Establishing an Ethernet connection
Extreme SLX-OS Management Configuration Guide
Extreme SLX-OS Management Configuration Guide
Extreme SLX-OS Management Configuration Guide
ExtremeRouting SLX 9640 Hardware Installation Guide
Shipping carton contents
Completed
on page 59.
21
Advertisement
Table of Contents
