Inspur NF5280M5 User Manual page 84

Table 8-26 UPI Configuration Interface Instruction Table
Interface Parameters
UPI Status
Degrade Precedence
Link Speed Mode
Link Frequency Select
Link L0p Enable
Link L1 Enable
UPI Failover Support
78
Figure 8-51
Function Description
UPI status submenu, displaying the current UPI link status
Degrade precedence settings. Options include:
Topology Precedence
Feature Precedence
When the system settings conflict, set it to Topology
Precedence to reduce Feature; or set it to Feature
Precedence to reduce Topology.
Link speed mode settings. Options include:
Fast
Slow
Link frequency select settings. Options include:
Auto
9.6 GT/s
10.4GT/s
Use Per Link Setting
Link L0p on-off settings. Options include:
Enabled
Disabled
Link power-saving mode setting, which is set when the
bandwidth is half of the peak bandwidth
Link L1 on-off settings. Options include:
Enabled
Disabled
In the case that system is extremely idle, turn off QPI Link.
UPI failover support on-off settings. Options include:
Enabled
Disabled
Default Value
----
Topology
Precedence
Fast
Auto
Enabled
Enabled
Enabled