Inspur NF5280M5 User Manual page 50

Press F12 to boot the PXE.
●
Table 8-1 BIOS Setup Interface Control Key Instruction Table
Key
<Esc>
<←> or <→>
<↑> or <↓>
<Home> or <End>
<+> or <->
<F1>
<F2>
<F9>
<F10>
<Enter>
Note: Options in grey are not available. Options with symbol "
8.1.2 UEFI/Legacy Mode Switch
Login to the BIOS Setup interface, select "Advanced -> CSM Configuration". Press Enter, to set
the Boot Mode (UEFI Mode/Legacy Mode). Set the Option ROM execution mode of Network,
Storage, Video OPROM Policy and Other PCI devices, as shown in the following figure.
At present, Inspur Purley platform servers are set to UEFI Mode by default. Compared
44
Function
Exit or return from submenu to main menu
Select a menu
Move the cursor up or down
Move the cursor to the top or bottom of the screen
Select the previous or next numerical value or setting of the current one
Help
Restore to the last configuration
Restore to the default configuration
Save and exit
Execute commands or select a submenu
Figure 8-1
" have a sub-menu.