Inspur NF5280M5 User Manual page 107

BIOS Setup
3) When there is no change in ME part, execute the command to update 16M BIOS:
AfuEfix64.efi BIOS.bin /b /p /n /x /k /l, and the process is as shown in the following figure.
After the update is complete, it is recommended to power cycle the system.
Figure 8-77
4) If there are any changes in ME part, execute the command to update 32M ME+BIOS:
AfuEfix64.efi BIOS.bin /b /p /n /x /k /l /me, and the process is as shown in the following
figure.
Parameter instructions:
- /B Program Boot Block
- /P Program main bios image
- /N Program NVRAM
- /X Do not check ROM ID
- /K Program all non-critical blocks
- /L Program all ROM Holes
- /ME Program ME Entire Firmware Block
101