Inspur NF5280M5 User Manual page 23

Item Description
16 OCP_A connector
17 I2C connectors (7)
18 NCSI connector
19 SSATA connector
20 OCP_C connector
21 SYS_IF_SLOT
22 UID│RST button
23 BMC_RST button
24 PCIE1_CPU0/1 connector
25 BMC_IF_SLOT
26 SATA connectors (2)
27 COM port
28 USB3.0 ports (2)
29 VGA port
30 MLAN port
31 PCIE0_CPU0 connector
32 CLR_CMOS
33 VGA+USB ports (Front control panel)
34 USB3.0 ports (2)
35 TPM connector
Table 3-7 See [3.3 Motherboard Components] for the jumper position.
Item Description
CLR_CMOS CMOS clear jumper
Note:
It is required to shut down the system, as well as disconnect the power supply during CMOS
clearing. Hold for 5 seconds after short-circuiting Pin2-3, and then short-circuit Pin1 and
Pin2 (the default status) of CLR_CMOS jumper with a jumper cap, to restore to its original
status.
Motherboard Jumper Introduction
●
Function
Short-circuit pin1-2, restore to normal status; short-circuit
pin2-3, clear CMOS.
Component Identification
17