Inspur NF5280M5 User Manual page 67

PCI Subsystem Settings
Network Stack Configuration
CSM Configuration
NVMe Configuration
PCH 10GBE PHY Card Configuration
iSCSI Configuration
Intel(R) Virtual RAID on CPU
Intel® Enthernet Connection X722 for
10GbE SFP+XX:XX:XX:XX:XX:XX
8.2.2.1 Trusted Computing
Trusted Computing interface is used to enable or disable BIOS support for security device.
Table 8-9 Trusted Computing Interface Instruction Table
Interface Parameters
Security Device Support
No Security Device Found
PCI subsystem settings
Network stack configuration
CSM configuration
NVMe configuration
PCH 10GBE PHY card configuration
iSCSI configuration
Intel NVMe virtual RAID configuration
Intel 10G NIC UEFI OPROM configuration
Figure 8-32
Function Description
Security device support settings. Options include:
Enabled
Disabled
BIOS supports TPM TCG version 1.2/2.0. BIOS supports TPM
module through TPM software binding, when the verification
of software binding fails, BIOS will record the error to SEL.
Display the status of security device. There is no information
displayed at present, to enable this function, it needs to
install TPM chip.
BIOS Setup
Default Value
Enabled
----
61