Inspur NF5280M5 User Manual page 150

● SNMP user is used for SNMP Get/Set.
● Uboot password is used to access BMC Uboot by BMC Diagnose Serial Cable.
9.15.1 IPMI/WEB/SSH Unified User
BMC supports IPMI 2.0 user model. Unified user could be created by IPMI CMD or Web GUI.
●
● Up to 16 users are supported.
● The 16 users can be assigned to any channel, including dedicated LAN and NCSI LAN.
All of the created users can login simultaneously.
●
● The available user privilege levels are Administrator, Operator, User, No Access.
Note: For security, please change default password when you first login, and please change
password periodically.
Table 30 IPMI Users
User ID User Name Password
1 admin
2 - 16 undefined
9.15.1.1 User Security
Username
● User Name is a string of 1 to 16 alpha-numeric characters, including '-', '_' and '@'.
● It must start with an alphabetical character.
It is case-sensitive.
●
● Special characters ',' (comma), '.' (period), ':' (colon), ';' (semicolon), ' ' (space), '/' (slash), '\\'
(backslash), '(' (left bracket), ')' (right bracket) and so on are not allowed.
Password Authentication
● Password encryption scheme: 64Bit Blowfish. Password is encrypted to store in BMC flash.
Password Complexity
● When password complexity check is disabled, password must be 1-16 characters long.
● When password complexity check is enabled, password must include special characters,
uppercase and lowercase letters, and numbers, 8-16 characters long.
● Complexity check is disabled by default, we strongly suggest you enable this function for
security.
Password Expiration
● Password Expiration, the range of the expiration is 0~90 days, and 0 presents forever.
Disabled by default, we strongly suggest you enable this function for security.
●
144
Status Default Privilege
admin Enabled Administrator
undefined Disabled Administrator
Characteristics
User Name/Password can be changed
User Name/Password can be changed