Inspur NF5280M5 User Manual page 56

2.3 Delete RAID volume. Select a created RAID Volume, press Enter. Select "Delete", there
will be a prompt. To delete the volume, select "Yes" and press Enter; to cancel the deletion,
select "No" and press Enter.
3. When Boot Mode is set to Legacy, a prompt "Press <CTRL-I> to enter Configuration
Utility..." will appear on the screen during system booting. Press [Ctrl] and [I] keys at the
same time to enter SATA RAID configuration, as shown in the following figure.
50
Figure 8-11
Figure 8-12
Figure 8-13