Inspur NF5280M5 User Manual page 62

Table 8-6
Interface Parameters
Get BMC Sharelink /
Dedicated Parameters
Configuration Address
Source
Current Configuration
Address
Station IP address
Subnet mask
Station MAC address
Router IP address
8.1.7.3 Set BMC Static Network Parameters
Set the Configuration Address Source option to [Static]. If the setting succeeds, the system
will prompt "Set Static BMC IP Address Source Success!!", as shown in the following figure.
Select the Station IP Address option. Press Enter, the Station IP Address window pops up.
Input the Static IP manually. After the setting is complete, press Enter to confirm, as shown
in the following figures:
56
Function Description
Set the way to get BMC network parameters, options include:
Do Nothing
Auto
Manual
Configure BMC network status parameters. When Get BMC
Dedicated Parameters is set to [Manual], this option will be
displayed. Options include:
Unspecified
Static
DynamicBmcDhcp
The static and dynamic settings take effect immediately.
Display the current BMC network parameters configuration
BMC station IP address
Subnet mask
BMC station MAC address
BMC router IP address
Figure 8-23
Figure 8-24
Default Value
Do Nothing
Unspecified
----
----
----
----
----