Inspur NF5280M5 User Manual page 105

Table 8-48 Boot Configuration Interface Instruction Table
Interface Parameters
Setup Prompt Timeout
Bootup NumLock State
Boot Options Retry
Quiet Boot
New Boot Option Policy
Fixed Boot Order Priorities
Boot Option #X
XXXX Driver BBS Priorities
8.2.8 Save & Exit
Save & Exit interface is used to set the options related with BIOS parameters saving and exit.
Function Description
Setup prompt timeout settings. Set the time to wait for the
Setup activate key, and the maximum value is 65535 seconds.
Bootup Numlock state on-off settings. Options include:
On
Off
Boot options retry on-off settings. Options include:
Enabled
Disabled
Quite boot on-off settings. Options include:
Enabled
Disabled
If it is set to Enabled, the boot logo displays as that set by
manufacturer, if set to Disabled, the boot screen displays as
the text-mode POST interface.
New UEFI boot option policy settings. Options include:
Default
Place First
Place Last
Boot options priority settings
XXXX driver BBS priority settings
Figure 8-74
BIOS Setup
Default Value
1
Off
Enabled
Enabled
Place First
----
---
99