Logs - Inspur NF5280M5 User Manual

9.8.5 PSU
Table 25 PSU Health State Monitored
State
Present
Power Supply Failure
Predictive Failure
Power Supply AC lost

9.9 Logs

Logs provide the history record of main devices state changes, used for fault diagnostic.
9.9.1 System Event Log
BMC provides the ability to record IPMI sensor based event history. System event log
outputs following items and user can get the sensor event information by WEB or IPMI CMD.
● Support up to 3639 items.
● Support linear mode. When SEL is full, new log will be discarded.
● Support cycle mode, default mode. When SEL is full, oldest log will be discarded.
● When SEL is almost full (75%), then Almost full log will be recorded in SEL.
● When SEL is full in linear mode, Full log will be recorded in SEL.
● When SEL is clear, Clear log will be recorded in SEL.
● Support exporting SEL by WEB or IPMI CMD.
● Support informing event to remote client by SNMP Trap, Email Alert, Syslog.
Go to page "Logs -> System Event Log" in Web GUI, all sensor based logs are displayed, users
can filter events by event severity, time, or sensor.
132
Level Related Model
Info SDR/SEL/Blackbox
Critical SDR/SEL/Blackbox
Warning SDR/SEL/Blackbox
Critical SDR/SEL/Blackbox