Snmp - Inspur NF5280M5 User Manual

Administration

9.5 SNMP

Simple Network Management Protocol (SNMP), consists of a set of standards for network
management, including an application layer protocol, a database schema, and a set of data
objects. It is an Internet Standard protocol for collecting and organizing information about
managed devices on IP networks and for modifying that information to change device
behavior.
In the BMC, the agent can obtain the server information such as network information, user
information, temperature/voltage/fan speed and so on through the SNMP service. At the
same time we can configure parameters and manage the server through BMC.
Support SNMP Get/Set/Trap.
●
Support V1/V2C/V3 version.
●
SNMPv3 supports authentication algorithm MD5 or SHA, and encryption algorithm to DES
●
or AES.
SNMP Get supports querying system health status, sensor status, hardware status, device
●
asset information, etc.
SNMP Set supports local users or network users to switch machine and other operations.
●
SNMP Trap supports IPM-based Trap messages.
●
User Administration NO
Security NO
Dual Image
NO
configuration
BMC Firmware
NO
Update
BIOS Firmware
NO
Update
CPLD Update NO
Restore Factory
NO
Defaults
Local Users setting
BMC System Administrator
Directory Group setting
LDAP setting
AD setting
Set image start order
Upgrade BMC firmware
Upgrade BIOS firmware
Upgrade CPLD
Restore BMC settings to factory defaults
BMC Settings
115