Inspur NF5280M5 User Manual page 120

Storage
Remote Control
Power and Fan
BMC Settings
Logs
Fault Diagnosis
114
Controller YES
Physical Drives YES
Logical Drives YES
Enclosure YES
Console Redirection NO
Locate Server YES
Virtual Media
Power Supply
YES
Monitor
Power Supply
YES
Configure
Server Power Control YES
Power Peak NO
Power Consumption NO
Fan Speed Control YES
BMC Network NO
Services NO
NTP NO
SMTP NO
Alerts NO
Threshold NO
Access Control NO
BMC Share NIC Switch NO
BIOS Boot Options NO
System Event Log YES
BMC Audit Log YES
Black Box Log NO
Event Log Setting NO
BMC Syslog Setting NO
BMC Self-inspection
YES
Result
BMC Recovery NO
Capture Screen NO
Host POST Code YES
RAID/SAS controller asset info and running state
Physical drives lists, asset info and running state
Logical drives lists, asset info and running state
Topology of RAID/SAS controller
HTML5 KVM
Java KVM
Console Redirection Setting
Display UID status
Turn on/off UID
Virtual Media settings
Display PSU present/health state, temperature,
input/output voltage/current/power, firmware
version
Manually Active/Standby switch
Power on/off/reset/cycle
Power Restore Setting
Server power on with random delay
Power limit setting
Display fan speed and state; Switch to manually fan
control
BMC Network Setting
BMC DNS Setting
Network Bonding
Network Link Setting
Supported service or protocol setting
BMC time setting
SMTP setting for email alert
SNMP Trap and email alert setting
Threshold setting for sensors
IP/MAC access limit policy
NCSI NIC switch
BIOS Boot Options setting
Display SEL
Display audit Log
Export Black Box Log
SEL Log store policy setting
BMC Syslog setting
Display BMC self-inspection result
Manually reset BMC or KVM
Auto Capture and Manual Capture
Display current and history POST code