Inspur NF5280M5 User Manual page 102

Table 8-44 Change User Settings Interface Instruction Table
Interface Parameters
User Name
User Password
User
Change User Password
Channel NO
User Privilege Limit
8.2.5.3 VLAN Configuration
VLAN Configuration interface is used to set the BMC VLAN parameters through BIOS.
Table 8-45 VLAN Configuration Interface Instruction Table
Interface Parameters
Sharelink/Dedicated VLAN Control
Sharelink/Dedicated VLAN ID
Sharelink/Dedicated VLAN Priority
96
Function Description
Input the name of user to modify
Input the password of user to modify. Only both the name and
password are correct, the following options can be modified. ----
User privilege on-off settings. Options include:
Enabled
Disabled
Change the user password. It must contain uppercase and
lowercase letters, special characters and numbers, within 8-20
characters.
Set BMC channel, input 1 or 8.
Modify the user privilege. Options include:
Reserved
Callback
User
Operator
Administrator
Figure 8-70
Function Description
BMC sharelink/dedicated VLAN control on-off settings.
Options include:
Enabled
Disabled
To enable VLAN, it needs to set the VLAN ID first.
BMC sharelink/dedicated VLAN ID settings, the range is
2 ～ 4094.
The setting takes effect immediately.
BMC sharelink/dedicated VLAN priority settings, the
range is 1 ～ 7.
The setting takes effect immediately.
Default Value
----
Disabled
----
0
Reserved
Default Value
Disabled
0
0