Inspur NF5280M5 User Manual page 100

8.2.5.2.1 Add User
Add User interface is used to add a BMC user through BIOS. The addition takes effect
immediately, and the user will be added to the BMC user list.
Table 8-42 Add User Interface Instruction Table
Interface Parameters Function Description
User Name
User Password
Channel NO
User Privilege Limit
Note: To enable the new user, it needs to set the User option in the Change User Settings
interface to [Enabled], and then this user can login to the BMC Web interface.
8.2.5.2.2 Delete User
Delete User interface is used to delete a BMC user through BIOS. The deletion takes effect
94
Figure 8-67
Set user name, supporting up to 16 characters.
Set user password. It must contain uppercase and lowercase letters,
special characters and numbers, within 8-20 characters.
Set BMC channel, input 1 or 8.
User privilege settings. Options include:
Reserved
Callback
User
Operator
Administrator
If the setting succeeds, it will prompt "Set User Access Command
Passed", and the BMC User takes effect immediately.
Default Value
----
----
----
Reserved