Diagnostics Connection - Mercedes-Benz E-Class Cabriolet 2018 Owner's Manual

24 General notes
BOSAL Automotive Phone: +49 7145
Carrier and Protection 9350-0
System GmbH
Fax: +49 7145
Steinbeisstraße 6 9350-239
71706 Markgröningen Email:
info@eur.bosal.com
www.bosal.com
TIREFIT kit
Copy and translation of the original declaration
of conformity:
EC declaration of conformity
In accordance with EC Directive 2006/42/EC
We hereby declare that the product
Product designation: Daimler electric air pump
Model designation: 0851ve, DT/UW 200046
MB part no.: A 000 583 8200
complies with the following relevant regulations:
2004/108/EC
Applied harmonised standards, in particular:
DIN EN 55014-1
DIN EN 55014-2:2009-06
Manufacturer: Dunlop Tech GmbH
Address: Birkenhainerstrasse 77, 63450 Hanau,
Germany
Authorised representative: IMS dept.
Date: June 2015
Signature: IMS-AM, IMS-AE-L

Diagnostics connection

The diagnostics connection is only intended for
the connection of diagnostic devices at a quali‐
fied specialist workshop.
& WARNING Risk of accident due to con‐
necting devices to the diagnostics con‐
nection
If you connect equipment to a diagnostics
connection in the vehicle, it may affect the
operation of vehicle systems.
As a result, the operating safety of the vehi‐
cle could be affected.
Only connect equipment to a diagnos‐
#
tics connection in the vehicle which is
approved for your vehicle by Mercedes-
Benz.
& WARNING Risk of accident due to
objects in the driver's footwell
Objects in the driver's footwell may impede
pedal travel or block a depressed pedal.
This jeopardises the operating and road
safety of the vehicle.
Stow all objects in the vehicle securely
#
so that they cannot get into the driver's
footwell.
Always fit the floor mats securely and
#
as prescribed in order to ensure that
there is always sufficient room for the
pedals.
Do not use loose floor mats and do not
#
place floor mats on top of one another.