Table of Contents
Advertisement
62
Occupant safety
If the seat backrest is not engaged and locked,
this will be shown on the multifunction display
on the instrument cluster.
If the child restraint system is equipped
with a Top Tether belt:
The risk of injury can be reduced by Top
Tether. The Top Tether belt facilitates an
additional connection between the child
restraint system attached with ISOFIX or
i‑Size and the vehicle.
Fit the ISOFIX or i-Size child restraint system
#
with Top Tether on the rear seat. Always com‐
ply with the child restraint system manufac‐
turer's installation instructions when doing
so.
Fold the rear seat backrest forwards
#
(
page 116).
→
Attach Top Tether hook
2
#
anchorage 1.
Fold the rear seat backrest back
#
(
page 117).
→
Make sure that Top Tether belt
#
twisted and the rear seat backrest is locked.
Secure the child restraint system with ISOFIX
#
or i-Size .
Tension Top Tether belt
3
#
Make sure that there is sufficient seat belt
#
strap to pull tight.
to Top Tether
3
is not
from the boot.
Advertisement
Table of Contents
