Pull switch 1.
#
Fold the corresponding seat backrest for‐
#
wards.
Folding the rear seat backrest back
* NOTE Damage to the seat belt
The seat belt could become trapped and thus
damaged when folding back the seat back‐
rest.
Make sure that the seat belt is not trap‐
#
ped when folding back the seat back‐
rest.
Move the driver's or front passenger seat for‐
#
wards, if necessary.
Seats and stowing 117
Fold corresponding seat backrest
#
until it engages.
If the seat backrest is not engaged and
locked, this will be shown on the multifunc‐
tion display on the instrument cluster.
Overview of the tie-down eyes
Observe the notes on loading the vehicle
(
page 114).
→
1
back