Table of Contents
Advertisement
Moving the wiper arms to the change posi‐
tion
Switch the ignition on and switch off again
#
immediately.
Within around 15 seconds, press button
#
î on the combination switch for approx‐
imately three seconds (
page 134).
→
The wiper arms will move into the change
position.
Removing the wiper blades
Fold the wiper arms away from the wind‐
#
screen.
Hold the wiper arm with one hand. With the
#
other hand, turn the wiper blade in the direc‐
tion of arrow
1
away from the wiper arm as
far as it will go.
Slide catch
2
in the direction of arrow
#
until it engages in the removal position.
Remove the wiper blade from the wiper arm
#
in the direction of arrow 4.
Fitting the wiper blades
Insert the new wiper blade into the wiper
#
arm in the direction of arrow 1.
Slide catch
2
in the direction of arrow
#
3
until it engages in the locking position.
Make sure that the wiper blade sits correctly.
#
Fold the wiper arms back onto the wind‐
#
screen.
Light and sight 135
3
Advertisement
Table of Contents
