Table of Contents
Advertisement
Only one person should use each seat
#
belt at any one time.
Seat belt adjustment function
®
Vehicles with PRE-SAFE
: if the front seat belt
is not pulled tight across your body, the seat belt
adjustment may automatically apply a certain
tightening force. Do not hold the seat belt tightly
while it is adjusting.
You can activate and deactivate the seat belt
adjustment function using the multimedia sys‐
tem (
page 37).
→
Releasing a seat belt
Press the release button in the seat belt
#
buckle and guide the seat belt back with the
seat belt tongue.
Activating/deactivating seat belt adjustment
via the multimedia system
Multimedia system:
Vehicle
î Vehicle settings
adjustment
Activate O or deactivate ª the function.
#
Seat belt warning function for the driver and
front passenger
The ü seat belt warning lamp in the instru‐
ment display is a reminder that all vehicle occu‐
pants must wear their seat belts correctly.
In addition, a warning tone may sound.
As soon as the driver and front passenger fasten
their seat belts, the seat belt warning goes out.
Function of the rear seat belt status display
The rear seat belt status display is only available
for certain countries.
Belt
The rear seat belt status display informs you
which rear seat belt is not fastened.
You can immediately dismiss the rear seat belt
status display using the back button on the left-
hand side of the steering wheel (
37
Occupant safety
page 251).
→
Advertisement
Table of Contents
