Table of Contents
Advertisement
382 Breakdown assistance
Driving distance possible in emergency
mode after the pressure loss warning:
Load condition
Driving distance pos‐
sible in emergency
Partially laden
Fully laden
The driving distance possible in emergency
mode may vary depending on the driving style.
Observe the maximum permissible speed of
80 km/h.
If a tyre has gone flat and cannot be replaced
with an MOExtended tyre, you can use a stand‐
ard tyre as a temporary measure.
TIREFIT kit storage location
The TIREFIT kit is located under the boot floor.
mode
80 km
30 km
1
Tyre sealant bottle
2
Tyre inflation compressor
%
You can find information on the power cate‐
gory (LK) and/or electrical data on the back
of the tyre inflation compressor:
LK2 – 12 V/15 A, 180 W, 0.8 kg
R
At a distance of approximately 1 m to the
tyre inflation compressor and approximately
1.6 m above the ground, the following sound
pressure levels apply:
Emission sound pressure level L
R
(A)
Sound power level L
R
The tyre inflation compressor is mainte‐
nance-free. If there is a malfunction, please
contact a qualified specialist workshop.
Using the TIREFIT kit
Requirements:
Required tools:
Tyre sealant bottle
R
TIREFIT sticker
R
Tyre inflation compressor
R
Gloves (depending on the vehicle equipment)
R
TIREFIT kit storage location: (
You can use TIREFIT tyre sealant to seal perfora‐
tion damage of up to 4 mm, particularly those in
the tyre contact surface. You can use TIREFIT in
outside temperatures down to -20 °C.
& WARNING Risk of accident when using
83 dB
PA
In the following situations, the tyre sealant is
unable to provide sufficient breakdown assis‐
91 dB (A)
WA
page 382)
→
tyre sealant
Advertisement
Table of Contents
