Table of Contents
Advertisement
only use the bicycle rack to transport
#
bicycles.
always properly secure the bicycle rack
#
by attaching it to the ball head.
only use bicycle racks approved by
#
Mercedes-Benz.
always observe the bicycle rack operat‐
#
ing instructions.
* NOTE Damage to, or cracks on, the
trailer hitch due to unsuitable bicycle
racks or bicycle racks being used incor‐
rectly
use only bicycle racks approved by
#
Mercedes-Benz.
Depending on the bicycle rack's design, up to
three bicycles can be transported on the bicycle
rack.
When mounted by attaching to ball head 1, the
maximum load capacity is 75 kg.
The load capacity is calculated from the weight
of the bicycle rack and the bicycle rack load.
Driving and parking 247
The vehicle's driving characteristics will change
when a bicycle rack is fitted:
The vehicle will be heavier.
R
Acceleration and slope-climbing ability will
R
be restricted.
Braking distances will be longer.
R
This may impair the vehicle's driving characteris‐
tics. Adapt your driving style accordingly. Drive
carefully and maintain a safe distance.
When using a bicycle rack, set the tyre pressure
for maximum load on the rear axle of the vehicle.
Further information on the tyre pressure can be
found in the tyre pressure table (
Notes on loading
The larger the distance between the load's
centre of gravity and the ball head, the greater
the load on the trailer hitch.
Therefore, observe the following notes:
mount heavy bicycles as close to the vehicle
R
as possible
page 403).
→
Advertisement
Table of Contents
