Table of Contents
Advertisement
136 Light and sight
Switch the ignition on.
#
Press the î button on the combination
#
switch.
The wiper arms will move into the original
position.
Maintenance display
The maintenance display is available only for
standard windscreen wipers.
Remove protective film
1
#
nance display on the tip of the newly fitted
wiper blades.
If the colour of the maintenance display changes
from black to yellow, the wiper blades should be
replaced.
%
The duration until the colour changes varies
depending on the usage conditions.
Replacing the windscreen wiper blades
(MAGIC VISION CONTROL)
Moving the wiper arms into the change posi‐
tion
Switch the ignition on, and switch it off again
#
immediately.
Within around 15 seconds, press button
#
î on the combination switch for around 3
seconds (
page 134).
→
The wiper arms will move into the change
position.
Removing the wiper blades
from the mainte‐
To bring the wiper blade into position to
#
be removed: raise the wiper arm away from
the windscreen and hold it with one hand.
With the other hand, turn the wiper blade in
the direction of arrow
resistance.
The wiper blade engages in the removal posi‐
tion with a click.
1
beyond the point of
Advertisement
Table of Contents
