Declaration Of Conformity - Mercedes-Benz E-Class Cabriolet 2018 Owner's Manual

Vehicles with a 48 V on-board electrical system
contain high voltage components. These compo‐
nents are marked with a high voltage label:
All work on high voltage components must be
carried out at a qualified specialist workshop.

Declaration of Conformity

Electromagnetic compatibility
The electromagnetic compatibility of the vehicle
components has been checked and certified
according to the currently valid version of Regu‐
lation UN R10.
Wireless vehicle components
The following information applies to all compo‐
nents of the vehicle and the information systems
and communication devices integrated into the
vehicle which receive and/or transmit radio
waves:
The components of this vehicle that receive
and/or transmit radio waves are compliant with
the basic requirements and all other relevant
conditions of Directive 2014/53/EU. You can
obtain further information from a Mercedes-Benz
Service Centre.
Jack
Copy and translation of the original declaration
of conformity:
Original CE declaration of conformity
Bosal Hungary KFT hereby declares that
Jack: Daimler jack products
with
serial no.:
General notes
A 205 580 00 00
A 212 580 00 18
A 212 580 04 18
A 231 580 00 18
complies with the following directives:
EU2006/42/EC
The following standard has been observed dur‐
ing development: EN ISO 12100
This publication provides authorisation to
inspect (equipment), prepare technical docu‐
mentation and provide authentication.
The jack may not be used before all the details
have been defined and confirmed, as described
in the Owner's Manual for the jack. If this is not
the case, the jack may not be used.
[Signature] [Signature]
[Name of signatory] [Name of signatory]
R&D Manager BHUK Project Engineer
23