Installation
Install Remote Control Handset Wall Holder
The remote control kit for this fi replace comes complete
with a wall-mounted holder. This holder is not required
in all installations but is provided as an optional feature
for those customers who wish to mount the remote
handset to the wall.
To install the holder to the wall, fi nd a convenient
location and use the hardware provided with the kit.
See the diagram below for required hardware and
confi gurations. Note that the holder can be installed at
the base of a light switch plate.
IMPORTANT. The location of the remote control handset
is important to assure proper temperature regulation. To
obtain a constant temperature, we recommend that the
handset should be between 3 and 15 feet away from the
appliance but not directly above it. We also advise that
the handset should be located away from any other heat
source and not in direct sunlight as this may aff ect the
temperature sensor located in the remote handset.
Packing Contents:
1 Wall Bracket A
2 Screws B
1 Screw C
2 Wall Anchor D
1 Spacer E
(detach before assembly)
1 Wall Bracket F
Alternative 1
58
Accessories Installation
Install Trim and Barrier Screen
Install the trim chosen by the customer for their
fi replace. Install as well the barrier screen which is
provided with the trim.
Show the customer how to remove the barrier screen
to access the controls.
Follow the instructions provided with the trim and leave
those instructions behind for the customer's further
reference.
Alternative 2
Alternative 3
Switch Plate