Valor H3 Series Installation Manual

INSTALLATION MANUAL
1030CIK Clean Installation Kit
CSA approved for use with Valor H3 1000 Models only
DANGER
!
A barrier designed to reduce the risk of burns from the hot
viewing glass is provided with this appliance and shall be
installed for the protection of children and other at-risk
individuals.
37-9/16" [954 mm]
The 1030 Clean Installation Kit installs at the time of
framing the appliance. Wall fi nishes are then applied
over top of fl anges and butted up to 1030's frame.
This kit is not intended to and cannot be installed
with an H3 trim or any other trim.
See appliance installation manual for more
information about finishing around this kit.
4007385-01
© Copyright Miles Industries Ltd., 2019
H3 Series
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
34" [863 mm]
I N ST A LL E R
L e a v e t h i s m a n u a l
w i t h t h e a p p l i a n c e .
C O N S U M E R
Retain this manual
for future reference.
Note: This kit must be installed
by a qualifi ed installer, service
agency or gas supplier at the time
of the heater installation. These
instructions are to be used in
conjunction with the fi replace
main installation instructions.
1-5/8"
[41 mm]
1-1/8"
[29 mm]
Upper panel
Convection baffle
Left hand
panel
Left hand
door
Barrier screen
Overview
H3 1000
Right hand
panel
Right hand
Lower panel
door
Removable panel
1