Table of Contents
Advertisement
Installation
Install Appliance for 1030 Clean Installation
Kit (new construction only)
The 1030 Clean Installation Kit installs at the time of
framing the appliance.
over top of fl anges and butted up to 1030's frame.
The side brackets provided loose with the appliance are
not needed with this kit.
The 1030 Clean Installation Kit is not compatible with
any other trim kit.
No
No
36
Wall fi nishes are then applied
X
X
1030CIK—Clean Installation Kit
Hearth considerations
You need to know whether there will be a hearth or
not in front of the appliance and some rules must be
considered:
Without hearth (up the wall)
In the case where there is no hearth, the wall fi nish
can extend up to the fl ange at bottom of 1030CIK. See
diagram.
With hearth
Combustible hearths and fl ooring are allowed
providing they are fl ush with, or below, the bottom of
the appliance. Hearths raised above the bottom of the
appliance (max. 1-5/8" thick) will need to be constructed
of non-combustible material and use a thermal break
such as Micore between the non-combustible fi nish
and any combustible sub-fl oor below.
WARNING
Raised, non-combustibe hearths, although
safe, can get quite hot and may present a
burn hazard to children and other at-risk
individuals.
Advertisement
Table of Contents
