Notes On Possible Property Damage - Samson TROVIS 5757-7 Mounting And Operating Instructions

1.3 Notes on possible property damage

NOTICE
!
Risk of actuator damage due to the supply voltage exceeding the permissible toler-
ances.
The actuator is designed for use according to regulations for low-voltage installations.
Î Observe the permissible tolerances of the supply voltage.
Risk of actuator damage due to excessively high tightening torques.
The connection of the electric actuator must be tightened with certain torques. Excessive
tightening torques lead to parts wearing out more quickly.
Î Observe the specified tightening torques.
Risk of damage to the actuator by turning it too far.
The actuator stem of the electric actuators can be adjusted manually.
Î Move the actuator stem only as far as the bottom or top end position.
Malfunction due to a configuration that does not meet the requirements of the appli-
cation.
The electric actuator with process controller is configured for the specific application by
setting configuration items and parameters.
Î Perform the configuration for the specific application during start-up and after a re-
set to default settings.
EB 5757-7 EN
Safety instructions and measures
1-5