Shoulder Belt - GB IDAN User Manual

4
lift shoulder belt over handle and around carrier.
make sure not to twist vehicle shoulder belt.
5
slide shoulder belt into the blue shoulder Belt
guide. make sure the shoulder belt passes
below the l.s.p. (linear side impact protection)
devices on both sides.
Refer to your vehicle owner's manual for how
your vehicle lap and shoulder belt locks.
in many vehicles, you can switch the shoulder
belt retractor into locking mode by pulling the
shoulder belt out all the way. in some vehicles
the buckle locks. check the vehicle owner's
manual to see how your system locks.
to check if the vehicle belt is locked, after you
install the infant carrier, pull up firmly on the lap
belt between the Belt guides. the belt should
remain tight if the vehicle system is locked.
push infant carrier firmly into vehicle seat
pressing down near the crotch strap between the
child's legs, while removing slack from lap belt.
Repeat for shoulder belt.
4
l.s.p. (linear side impact protection)
4
5
5
53