Using Latch Guides - GB IDAN User Manual

USInG latCh
Center seating Positions
if your vehicle does not have lower anchors in the center seating
position, check your vehicle owner's manual to see if you are
allowed to use the two inner lower anchors from the outboard
seating positions to install a child Restraint.
gB allows this child restraint to be installed using the two
inner lower anchors from the outboard seating positions
if the distance between the inner lower anchors is
between 11 and 20 inches (28-51 cm) and if your vehicle
manufacturer allows it. (if distance is not correct and/or not
allowed by vehicle manufacturer, use the vehicle belt for
installation in the center position.)
When using the inner lower anchors make sure there are no
obstructions from a buckle stalk for the installation and that the
latCh straps or mini connectors do not block vehicle belt buckles.

using latCh guides

locate the lower latCh anchors or the symbols indicating their location.
if the lower latCh anchors are hidden behind the crease between the
seat back and seat cushion, install the supplied latCh guides to the
lower latCh anchors for easier installation of the load leg Base.
to install, connect the two latCh guides to the two lower latCh
anchors by sliding the latCh guides into the crease and under the lower
latCh anchors.
31